ITEN
Bandsaw blades for metal

Bandsaw blades

Bandsaw blades for metal

Bimetal bandsaw blades with HSS M42 and M51 cutting edges, carbide (tungsten carbide) and carbon steel blades, in all tooth patterns and pitches.

For horizontal and vertical sawing machines, with manual or automatic cycles. Thanks to our in-house welding we can supply any length to fit your sawing machine.

Metal cutting Sawing machines
Cutting edges
HSS M42, M51, carbide, carbon steel
Machines
horizontal and vertical sawing machines
Sizes
any, welded in-house
Request a quote Bandsaw blades for metal – catalogue pp. 30, 31

Not sure it is the right one? Try the product finder

Sizes and codes

● available · Special sizes on request

Bandsaw blades – sizes and grades13 rows
Size h x th. (mm) M42 ST M42 SP M42 BX M42 AL M51 EVO CARBON
6 x 0.65 ● ● – – – ●
6 x 0.90 ● ● – – – –
10 x 0.65 ● ● – – – ●
10 x 0.90 ● ● – – – –
13 x 0.65 ● ● – – – ●
13 x 0.90 ● ● – – – (16 x 0.8)
20 x 0.90 ● ● ● ● – (20 x 0.8)
27 x 0.90 ● ● ● ● ● (25 x 0.9)
34 x 1.10 ● ● ● ● ● (32 x 0.9)
41 x 1.30 ● ● ● ● ● (38 x 0.9)
54 x 1.30 ● ● ● ● – (50 x 0.9)
54 x 1.60 ● ● ● ● ● –
67 x 1.60 ● ● ● – ● –

CARBON column: sizes available shown in brackets (height × thickness).

Blade height5 rows
Blade height (mm) Available
6 - 27 ●
34 ●
41 ●
54 ●
67 ●

Always specify the blade pitch.

M42 STE – sizes2 rows
h x th. (mm) M42 STE
27 x 0.90 ●
34 x 1.10 ●
Technical features and applications – M42 ST / STE6 rows
Item Description
Blade available with constant pitch and variable pitch teeth
Cutting edge HSS M42 steel alloyed with 8% Co and 10% Mo (68÷69 HRC)
Teeth milled - positive rake angle; STE: 0° rake angle
Performance excellent cutting performance on a wide range of materials
Applications solid and interrupted sections; steels with hardness / tensile strength up to 40 HRC / 1300 N/mm², cast iron and non-ferrous metals; STE: for low/medium alloy carbon steels
Mounting on horizontal and vertical sawing machines with manual or automatic cutting cycle
Technical features and applications – M42 SP6 rows
Item Description
Blade available with constant pitch and variable pitch teeth
Cutting edge HSS M42 steel alloyed with 8% Co and 10% Mo (68÷69 HRC). Backing 4% Cr (50 HRC)
Teeth ground - HIGHLY positive rake angle
Performance higher speed, precision and cut finish. Minimal chipping. Outstanding versatility.
Applications solid and interrupted sections; steels with hardness / tensile strength up to 45 HRC / 1400 N/mm², non-ferrous metals and stainless steels
Mounting on horizontal and vertical sawing machines with manual or automatic cutting cycle
Technical features and applications – M42 BX6 rows
Item Description
Blade available with variable pitch teeth
Cutting edge HSS M42 steel alloyed with 8% Co and 10% Mo (68÷69 HRC). Backing 4% Cr (50 HRC)
Teeth ground - Multirake type rake with reinforced profile
Performance excellent cutting squareness, great sturdiness and impact resistance
Applications interrupted sections, single or bundled, of tubes, profiles, beams and steels including stainless, with hardness / tensile strength up to 45 HRC / 1400 N/mm²
Mounting on horizontal and vertical sawing machines with manual or automatic cutting cycle
Technical features and applications – M42 AL6 rows
Item Description
Blade available with constant pitch and variable pitch teeth
Cutting edge HSS M42 steel alloyed with 8% Co and 10% Mo (68÷69 HRC). Backing 4% Cr (50 HRC)
Teeth ground - positive rake angle - large gullet - increased set
Performance high chip clearance capacity and reduced blade back pinching
Applications solid and interrupted sections and castings, aluminium and its alloys, non-ferrous metals, copper, bronze, zinc and plastics
Mounting on horizontal and vertical sawing machines with manual or automatic cutting cycle
Technical features and applications – M51 EVO6 rows
Item Description
Blade available with constant pitch and variable pitch teeth
Cutting edge HSS M51 steel alloyed with 10% Co and 10% W (69÷70 HRC). Backing 4% Cr (50 HRC)
Teeth ground - EXTREMELY positive rake angle
Performance remarkable resistance to dynamic loads, high penetration and stock removal, and optimum chip breaking
Applications solid bars in high-alloy steels for bearings, dies and tools, high-nickel alloys (Inconel, Hastelloy, Monel, Nimonic, etc.), steels with hardness / tensile strength up to 50 HRC / 1700 N/mm², titanium, special bronzes, AMPCO
Mounting ONLY on horizontal and vertical sawing machines with automatic cutting cycle
Technical features and applications – CARBON6 rows
Item Description
Blade available with constant pitch teeth
Cutting edge chromium alloy steel. Hardened flexible back.
Teeth hardened to 65-66 HRC
Performance great versatility of use, excellent wear and heat resistance
Applications solid and interrupted sections of low-alloy steels, non-ferrous metals, plastics, fibres, wood
Mounting on vertical sawing machines with manual cutting/feed cycle

Related products

RED series reinforced discs RED line RED series reinforced discs Reinforced cutting and grinding discs offering excellent value for money, for common steels and building materials. Diamond discs and core bits Diamond tools Diamond discs and core bits Turbo, segmented and thin diamond discs for ceramics, for dry and wet use; core bits for dry core… Flexible abrasive fibre discs Fibre discs · standard and high performance Flexible abrasive fibre discs Double resin-bonded abrasive on vulcanised fibre, for use with a backing pad on an angle grinder. Standard line… Abrasive sponges and sanding blocks For manual use Abrasive sponges and sanding blocks Foam blocks with two or four abrasive sides, for hand use in a wide range of jobs.