Maximum speed and RPM: how to read the label on an abrasive disc

What you find on the label
Every abrasive disc that complies with EN 12413 carries some standard information:
- Dimensions: diameter × thickness × bore, for example 125 × 1.0 × 22.23 mm.
- Maximum peripheral speed, in metres per second (m/s): for reinforced discs for angle grinders this is normally 80 m/s.
- Maximum RPM (revolutions per minute), calculated for that diameter.
- Intended use: cutting or grinding, material (steel, stainless steel, stone…).
- Expiry date and batch number.
- Safety pictograms: goggles, ear protection, gloves, mask, and any restrictions (for example “not for grinding”).
Peripheral speed and RPM: what is the difference
Peripheral speed is how fast the edge of the disc travels. The larger the disc, the faster its edge moves at the same RPM. That is why a 230 mm disc has a much lower maximum RPM than a 115 mm disc, even though both are rated at 80 m/s.
Typical values for 80 m/s discs:
| Diameter | Maximum RPM |
|---|---|
| 115 mm | 13,300 rpm |
| 125 mm | 12,250 rpm |
| 180 mm | 8,500 rpm |
| 230 mm | 6,650 rpm |
The golden rule
The maximum RPM printed on the disc must be equal to or higher than the RPM on the grinder’s rating plate. Never the other way round.
Take special care when fitting a larger disc on a machine designed for small discs: a 125 mm grinder runs at around 11,000–12,000 rpm, far too fast for a 230 mm disc. Besides being dangerous, the disc would not even fit inside the guard, which must never be removed.
A 10-second check before fitting
- Read the maximum RPM on the disc and on the machine.
- Check that the bore is right for the spindle and flange.
- Check the expiry date on the label.
- Make sure the disc is not cracked, chipped or damp.
If any of these points is not right, do not fit the disc.
In short
The label is not a detail: it tells you what the disc is made for and up to what speed it is safe. All Kondor reinforced discs carry this information, together with the expiry date. If you are unsure which disc to use with your machine, write to us and we will help.